Theses and Dissertations
Issuing Body
Mississippi State University
Advisor
Adebiyi, George
Committee Member
Berry, John T.
Committee Member
Luck, Rogelio
Date of Degree
5-7-2005
Document Type
Graduate Thesis - Open Access
Major
Mechanical Engineering
Degree Name
Master of Science (M.S.)
College
James Worth Bagley College of Engineering
Department
Department of Mechanical Engineering
Abstract
The interfacial heat transfer coefficient is an important variable regarding the subject of metal castings. The error associated with the experimental temperature data must be dealt with appropriately so that they do not significantly affect the resulting interfacial heat transfer coefficient. The systematic and random errors are addressed using a combination of three-dimensional finite element modeling and the matrix transform method, respectively. Experimentally obtained A356 permanent mold casting data was used to estimate the interfacial heat transfer coefficient corresponding to common industrial mold coatings.
Recommended Citation
Weathers, Jeffrey Wayne, "COMBINING THE MATRIX TRANSFORM METHOD WITH THREE-DIMENSIONAL FINITE ELEMENT MODELING TO ESTIMATE THE INTERFACIAL HEAT TRANSFER COEFFICIENT CORRESPONDING TO VARIOUS MOLD COATINGS" (2005). Theses and Dissertations. 5308.
https://scholarsjunction.msstate.edu/td/5308